-
Carbomastic 15 LT (Nullifire PM015)
£94.732-component, high build coating with excellent adhesion to rusted steel and most aged coatings.
Replaces Nullifire PM015 Aluminium Epoxy Primer
Surface tolerant
Recommended for painting over rusted steel where hand cleaning only is possible
Carbomastic 15 LT penetrates through rust to steel substrate and stops further corrosion and undercutting
Fast curing at low temperatures
High solids give good coverage and reduced solvent emission
Excellent maintenance primer for piping, bridges, tank exteriors, ships and offshore structures, etc
Also available in 20L – price on application – contact our sales team for more information on 0113 2455450 or send a message to sales@rawlinspaints.com.Nullifire have made the decision in March 2023 to rebrand Nullifire PM015 Aluminium Epoxy Primer as Carboline Carbomastic 15 LT – please see a letter explaining the changes HERE.
-
Nullifire FB750 Intubatts
£34.04Fully identifiable, fire resistant ablative skinned rock mineral wool boards used for fire protection of openings in fire barriers used for pipes and services to pass through.
Refer to order references below
Factory finished unique multilayered, low resin bonded, rock mineral fibre board
Ablative coated on both faces with unique Optifire-identifiable coating
Manufactured under controlled factory conditions to ISO 9001
May be overpainted
Water repellent core
Easy to cut and flexural
Fully tested for up to 240 minutes integrity and insulation
Intubatt 2 (140kg) is used in most instances and has the majority of testing, Intubatt 1 (180kg) is higher density and is normally used in steel protection and when looking to upgrade the acoustic performance. Please contact us for advice on which grade would be best suited to your project, on 0113 2455450 (option 2) or send a message to technical@rawlinspaints.com -
Nullifire FB770 Intudeck
Price range: £47.54 through £51.86FB770 Intudeck is a rock mineral fibre board coated on one side with a smoke and fire resistant ablative coating, containing Optifire unique traceability identifier.
-
Nullifire FC150 Solvent
£33.08Nullifire FC150 Solvent is suitable to use with Nullifire products & systems. Please refer to the datasheets for accurate information, or, alternatively, give our Technical Team a call.
More Information Delivery Info
-
Nullifire FF197 Gun Grade Fire Rated PU Foam
£202.31A modified, single component, fire rated polyurethane foam used to seal door frames and linear gaps throughout the fire rated areas of a building. This pink fire foam is easy to identify and cures to form a semi-rigid foam that can accommodate some degree of movement of the joint.
Acts as an effective fire seal for up to 4 hours (BS EN 1366-4) when used with Nullifire FS702 Intumescent Acrylic or Nullifire FS703 Silicone Sealant
Also tested to BS EN 1634-1 and meets BS 476-20 & 22
Approved for use within: Single Door, door and a quarter, door and a half and double doors
Works with standard plastic and standard wooden packers
No architrave required (but can be added if required)
Suitable for gaps up to 35mm
Up to 4 hours on linear gaps
Also gives 30 minutes on all the above doors at a reduced frame width of 70mm
Tack free time in just 10 minutes
Gun and straw compatibleProfessional use only – from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit – https://www.safeusediisocyanates.eu/
More Information Delivery Info -
Nullifire FI025 Intuflex Wrap
£89.58Insulated pipe and cable wrap for preventing heat exchange in pipes and cable trays through fire barriers, walls and floors.
For steel pipes, cable trays, cable ladders, cable baskets, steel trunking and movement sleeves.
Can be cut for better accommodation, if required. -
Nullifire FI064 Soft Joint Backer
£27.8264 kg rock mineral wool slab, to be cut on site and rotated through 90° to form a highly compressible backer with vertically orientated fibres. Specifically tested for a high movement backer, when used in conjunction with other Nullifire products.
The system is suitable for both horizontal and vertical applications and can offer acoustic capability of up to 46 dB (limited by surrounding substrates).Up to 4 hours fire resistance Tested to BS EN 1366-4 and BS EN 1363-1
Easy to cut, compress and install
Allows the retrospective addition of cladding -
Nullifire Fire Stopping Accessories
£26.68An extensive range of accessories and ancillary products for use with Nullifire (Firetherm) systems, helping the installation and application of firestopping products. Refer below to see the full range.
More Information Delivery Info -
Nullifire FJ203 Fire Resistant Backer Rod
£166.57Firestopping backer rod made from rock wool, sheathed with flexible glass wires. It is used to make fire-resistant expansion joints between masonry elements, wall and slab, directly exposed to fire or not, in hospitals, hotels, car parks, schools, airports, nuclear power plants etc.
Can be used alone or in combination with Nullifire FS703 Silicone Sealant
Classification reports for fire resistance up to 240 minutes according to NF EN 13501-2
For joint widths from 10 to 50mm
High regularity – Fits all joints
Packaged in long coils – Good cohesion, easy to cut
Movement capacity up to 20% (tested during fire test)Please note: Selected items are Made To Order subject to a MOQ and an extended lead time – please see below
-
Nullifire FJ220 Intubatt 3 Cavity Barrier
Price range: £1.56 through £50.12FJ220 is a rock fibre compressible slab, with an ablative coating to provide a fire and smoke seal. We offer both single and double coated versions. FJ220 is supplied pre-configured, ablative coated and factory cured.
-
Nullifire FJ220 Intubatt 3 Cavity Barrier
£43.66A rock fibre compressible slab, with an ablative coating to provide a fire and smoke seal. Supplied pre-configured, ablative coated and factory cured.
Choose from 2 options:
Single coated for horizontal seals
Double coated for vertical sealsLow cost and simple install
Easy to cut
Fully identifiable using Optifire
Can offer an acoustic capability of up to 52 dB
Up to 2 hours fire resistance – Tested to both BS 476 20-22 and BS EN 1366-4 -
Nullifire FJ240 Spanatherm
£58.74Fire resistant rock fibre expansion joints for slab edging and curtain walling, preventing the spread of smoke and fire.
Up to 2 hours fire integrity
Vapour and smoke barrier
Allows significant movement accommodation
1200 x 600 x 100mm slabsPlease contact our technical team on 01132455450 for custom size requirements
