-
Boron-Alloy
Tungsten Carbide Venturi Liner-Aluminium Jacket & Water Jet System.
Product Code Bore Size(Inches) Length(MM) Entry(MM) Additional Information S50-516BN 5/16” (8.0mm) 140 No. 5 S50-616BN 3/8” (9.5mm) 165 No. 6 S50-716BN 7/16” (11.0mm) 199 No. 7 S50-816BN 1/2” (12.5mm) 225 No. 8 -
Carbomastic 15 LT (Nullifire PM015)
£94.732-component, high build coating with excellent adhesion to rusted steel and most aged coatings.
Replaces Nullifire PM015 Aluminium Epoxy Primer
Surface tolerant
Recommended for painting over rusted steel where hand cleaning only is possible
Carbomastic 15 LT penetrates through rust to steel substrate and stops further corrosion and undercutting
Fast curing at low temperatures
High solids give good coverage and reduced solvent emission
Excellent maintenance primer for piping, bridges, tank exteriors, ships and offshore structures, etc
Also available in 20L – price on application – contact our sales team for more information on 0113 2455450 or send a message to sales@rawlinspaints.com.Nullifire have made the decision in March 2023 to rebrand Nullifire PM015 Aluminium Epoxy Primer as Carboline Carbomastic 15 LT – please see a letter explaining the changes HERE.
-
Ecco 35 Pressure Feed Spray Gun
Ecco 35 Pressure Feed Spray Gun Description The Ecco 35 is a pressure feed spray gun featuring a gun body in anodised aluminium. Features Available with […]
-
Ecco 351 Suction Feed Gun
The Ecco 351 is a suction feed spray gun featuring a 1-litre suction cup and a gun body in anodised aluminium.
Features
- Available with a range of paint nozzles – 1.1 – 2.7mm
- Needles available in nylon and stainless steel
-
Ecco 352 Gravity Feed Gun
The Ecco 351 is a suction feed spray gun featuring a 1-litre suction cup and a gun body in anodised aluminium.
Features
- Available with a range of paint nozzles – 1.1 – 2.7mm
- Needles available in nylon and stainless steel
-
Ecco 651S Suction Feed Spray Gun
The Ecco 651S is a suction feed, HVLP spray gun featuring a 1-litre suction cup. It has fluid channels in stainless steel for water based paint types.
Features
- Suction feed HVLP spray gun
- Features a 1-litre suction cup
- Fluid channels in stainless steel for water based paint types
-
Ecco 652S Gravity Feed Spray Gun
The Ecco 652S is a gravity feed, HVLP spray gun featuring a 0.5-litre suction cup and drip guard. It has fluid channels in stainless steel for water and solvent based paint types.
Features
- Gravity feed HVLP spray gun
- Features a 0.5-litre suction cup with a drip guard
- Fluid channels in stainless steel for water and solvent based paint types
-
Ecco 65S Pressure Feed Spray Gun
The Ecco 65S is a pressure feed, HVLP spray gun featuring paint channels. It is available in stainless steel for water and solvent based paint types.
Features
- Fluid supplied from pressure pots, pumps or circulation system
-
FB750 Intubatt
Rock mineral fibre board with an ablative elastomeric coating.
FB750 Intubatt is a lightweight 4 hour fire barrier comprising of a rock mineral fibre board with a uniquely identifiable ablative coating, containing OptifireTM technology. Designed to reinstate the fire performance of compartment walls and floors which have been breached by penetrating services, provding a fire, smoke, thermal, acoustic and air pressure seal.
-
FF197 Fire Rated PU Construction Foam
A moisture-curing foam that can provide up to 4 hours fire integrity to openings in masonry construction.
FF197 is a modified, single component, fire rated polyurethane foam. It is used to seal door frames, window frames and linear gaps throughout the fire rated areas of a building.
-
FI025 Intuflex Insulation Wrap
Designed to reinstate the fire insulation of services to the requirement of the compartment line in terms of EI.
FI025 Intuflex is a fire insulation upgrade material, primarily made from rock mineral fibre, with an outer layer of foil to provide a class O surface spread of flame around a class A1 core. It is designed to upgrade the insulation rating of uninsulated penetrated services (where required) which have been sealed using a Nullifire product.
-
FI140 Shutter Slab
FI140 Shutter Slab is a rigid, moisture resistant, non-combustible, rock mineral wool slab and used as a shutter/dam for our Nullifire FR230 Intucompound Fire Mortar, for use in fire compartment separating walls & floors.
-
FJ203 Rope
A practical solution for fire sealing combustible pipes and ducting.
FJ203 is a non-combustible fire resistant woven rope, made of rock mineral fibre, and sheathed with flexible glass wires to make an easy to handle expansion joints product. It is designed to reinstate the fire compartment requirement, where expansion joints have been formed within masonry / concrete elements, in walls and floors.
-
FJ400 Intuspan Intumescent Joint Filler
Price range: £16.20 through £103.85A highly flexible, intumescent expansion joint designed for extensive movement, suitable for gaps up to 100 mm. It provides fire resistance for up to 2 hours and typically requires no adhesive in most applications.
-
FP170 Intucollar Intumescent Pipe Collar
Used to seal combustible pipes as they pass through fire compartment walls and floors.
FP170 Intucollar comprises of a stainless steel and a reactive intumescent lining. It expands when exposed to fire, reinstating the fire performance of compartment walls and floors which have been penetrated by combustible pipes.
-
FP220 Service Sleeve
A practical solution for fire sealing combustible pipes and ducting.
A pipe closer device, comprising of an intumescent material within a stainless steel shell that is positioned around combustible pipes to provide up to 4 hours fire protection. Designed specifically to provide a low cost solution for fire sealing combustible pipe penetrations as they pass through fire compartment walls and floors, whilst completely protecting the cavity within stud work walls.
-
FP302 Intustrap Intumescent Strap
A graphite impregnated intumescent product with high flexibility.
FP302 is designed to close o combustible elements whilst maintaining compartmentation. It is also a component product incorporated within many Nullifire fire stopping products.
-
FP333 Trunking Infill
Provides a fire-tight barrier for trunking boxes where frequent changes to cabling may be required.
FP333 Trunking Infill is a fire resistant compressible foam strip layered with high expansion intumescent material produced in three sizes. It is designed to provide a permanent fire barrier within trunking boxes passing through fire compartment walls.
-
FR230 Intucompound Fire Mortar
Gypsum based mortar used to reinstate the fire resistance performance of floor constructions where the compartment line has been breached by service penetrations.
FR230 provides a safe working platform for loads upto 2.5 kg/m² when installed in full accordance to our recommendations. It is used to stop the spread of fire and smoke around services that pass through compartment walls and floors, whilst providing an unsupported load bearing capacity (see Specification Information). The system also provides thermal, acoustic and air sealing performance.
-
FS702 Intumastic Fire Resistant Acrylic
A water based acrylic sealant which cures to give a firm but flexible fire seal. Used to repair damage or bond to FB750 Intubatt.
FS702 Intumastic is suitable for use in various construction joints oering up to 30% movement capability whilst providing an excellent acoustic and air seal. It is suited for use around non-combustible services, cables, rock fibre insulated non-combustible pipes, using a minimum depth of 25 mm
-
FS702 Intumastic Fire Resistant Acrylic
A water based acrylic sealant which cures to give a firm but flexible fire seal. Used to repair damage or bond to FB750 Intubatt.
FS702 Intumastic is suitable for use in various construction joints offering up to 30% movement capability whilst providing an excellent acoustic and air seal. It is suited for use around non-combustible services, cables, rock fibre insulated non-combustible pipes, using a minimum depth of 25 mm.
-
FS703 Fire Resistant Silicone Sealant
Ideal for sealing movement joints where a fire rating is required.
FS703 is a low modulus, neutral cure, silicone sealant, suitable for linear gaps sealing in order to reinstate the fire performance in compartment walls and floors. Suitable for fire seal joints in compartment walls and floors, static linear joints (masonry to masonry/rigid wall/rigid floor/flexible wall) and window & door joints (masonry to timber/steel)
-
FS709 HP Intumescent Sealant
A high pressure exerting, graphite intumescent mastic which when exposed to fire expands.
FS709 HP is designed to close off gaps and penetrations in compartment walls and floors, to provide up to 4 hours fire resistance. It can be used on flexible walls & rigid walls (100 mm or wider), rigid floors (150 mm or wider), and also with FB750 Intubatt Coated Batt. This product has been formulated to close off combustible pipe penetrations in the event of a fire, negating the need for pipe closers or wrap systems. FS709 has been tested in a variety of service penetrations.
-
FS712 Intucoat Brush
Price range: £19.99 through £39.99A water based acrylic coating and adhesive.
FS712 may be used in conjuction with FB750 Intubatt, FB770 Intudeck and FJ220 Intubatt3 as a bonding agent, both to substrate and cut piece, and a surface repair coating.
-
G40 Air-Assisted
G40 Air-Assisted, designed to maximise efficiency and quality, this air-assist gun uses the highest quality components for long lasting relable performance.
-
Graco XTR5 Airless Spray Gun
Graco’s specialised airless spray guns provide the finest finishes, durability, performance and reliability in the industry. The sprayers are designed to be ergonomically friendly, providing comfort for the operator during long hours of spraying.
Features
- Compact, light-weight design allows for easy manoeuvrability
- Ergonomic design means it is comfortable to use
- Handles the toughest coatings and performs in extreme spray conditions
- High quality materials and construction
- XTR5 – Maximum working pressure: 345 bar (5000 psi)
