-
Graco XTR7 Airless Spray Gun
Graco’s specialised airless spray guns provide the finest finishes, durability, performance and reliability in the industry. The sprayers are designed to be ergonomically friendly, providing comfort for the operator during long hours of spraying.
Features
- Compact, light-weight design allows for easy manoeuvrability
- Ergonomic design means it is comfortable to use
- Handles the toughest coatings and performs in extreme spray conditions
- High quality materials and construction
- XTR7 – Maximum working pressure: 500 bar (7250 psi)
-
Nullifire FB750 Intubatt
Price range: £27.24 through £34.04FB750 Intubatt is a lightweight fire barrier comprising of a rock mineral fibre board with an uniquely identifiable ablative coating, containing Optifire unique traceability identifier.
-
Nullifire FB750 Intubatts
£34.04Fully identifiable, fire resistant ablative skinned rock mineral wool boards used for fire protection of openings in fire barriers used for pipes and services to pass through.
Refer to order references below
Factory finished unique multilayered, low resin bonded, rock mineral fibre board
Ablative coated on both faces with unique Optifire-identifiable coating
Manufactured under controlled factory conditions to ISO 9001
May be overpainted
Water repellent core
Easy to cut and flexural
Fully tested for up to 240 minutes integrity and insulation
Intubatt 2 (140kg) is used in most instances and has the majority of testing, Intubatt 1 (180kg) is higher density and is normally used in steel protection and when looking to upgrade the acoustic performance. Please contact us for advice on which grade would be best suited to your project, on 0113 2455450 (option 2) or send a message to technical@rawlinspaints.com -
Nullifire FB770 Intudeck
Price range: £47.54 through £51.86FB770 Intudeck is a rock mineral fibre board coated on one side with a smoke and fire resistant ablative coating, containing Optifire unique traceability identifier.
-
Nullifire FC150 Solvent
£33.08Nullifire FC150 Solvent is suitable to use with Nullifire products & systems. Please refer to the datasheets for accurate information, or, alternatively, give our Technical Team a call.
More Information Delivery Info
-
Nullifire FF197 Gun Grade Fire Rated PU Foam
£202.31A modified, single component, fire rated polyurethane foam used to seal door frames and linear gaps throughout the fire rated areas of a building. This pink fire foam is easy to identify and cures to form a semi-rigid foam that can accommodate some degree of movement of the joint.
Acts as an effective fire seal for up to 4 hours (BS EN 1366-4) when used with Nullifire FS702 Intumescent Acrylic or Nullifire FS703 Silicone Sealant
Also tested to BS EN 1634-1 and meets BS 476-20 & 22
Approved for use within: Single Door, door and a quarter, door and a half and double doors
Works with standard plastic and standard wooden packers
No architrave required (but can be added if required)
Suitable for gaps up to 35mm
Up to 4 hours on linear gaps
Also gives 30 minutes on all the above doors at a reduced frame width of 70mm
Tack free time in just 10 minutes
Gun and straw compatibleProfessional use only – from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit – https://www.safeusediisocyanates.eu/
More Information Delivery Info -
Nullifire FI025 Intuflex Wrap
£89.58Insulated pipe and cable wrap for preventing heat exchange in pipes and cable trays through fire barriers, walls and floors.
For steel pipes, cable trays, cable ladders, cable baskets, steel trunking and movement sleeves.
Can be cut for better accommodation, if required. -
Nullifire FI064 Soft Joint Backer
£27.8264 kg rock mineral wool slab, to be cut on site and rotated through 90° to form a highly compressible backer with vertically orientated fibres. Specifically tested for a high movement backer, when used in conjunction with other Nullifire products.
The system is suitable for both horizontal and vertical applications and can offer acoustic capability of up to 46 dB (limited by surrounding substrates).Up to 4 hours fire resistance Tested to BS EN 1366-4 and BS EN 1363-1
Easy to cut, compress and install
Allows the retrospective addition of cladding -
Nullifire Fire Stopping Accessories
£26.68An extensive range of accessories and ancillary products for use with Nullifire (Firetherm) systems, helping the installation and application of firestopping products. Refer below to see the full range.
More Information Delivery Info -
Nullifire FJ203 Fire Resistant Backer Rod
£166.57Firestopping backer rod made from rock wool, sheathed with flexible glass wires. It is used to make fire-resistant expansion joints between masonry elements, wall and slab, directly exposed to fire or not, in hospitals, hotels, car parks, schools, airports, nuclear power plants etc.
Can be used alone or in combination with Nullifire FS703 Silicone Sealant
Classification reports for fire resistance up to 240 minutes according to NF EN 13501-2
For joint widths from 10 to 50mm
High regularity – Fits all joints
Packaged in long coils – Good cohesion, easy to cut
Movement capacity up to 20% (tested during fire test)Please note: Selected items are Made To Order subject to a MOQ and an extended lead time – please see below
-
Nullifire FJ220 Intubatt 3 Cavity Barrier
Price range: £1.56 through £50.12FJ220 is a rock fibre compressible slab, with an ablative coating to provide a fire and smoke seal. We offer both single and double coated versions. FJ220 is supplied pre-configured, ablative coated and factory cured.
-
Nullifire FJ220 Intubatt 3 Cavity Barrier
£43.66A rock fibre compressible slab, with an ablative coating to provide a fire and smoke seal. Supplied pre-configured, ablative coated and factory cured.
Choose from 2 options:
Single coated for horizontal seals
Double coated for vertical sealsLow cost and simple install
Easy to cut
Fully identifiable using Optifire
Can offer an acoustic capability of up to 52 dB
Up to 2 hours fire resistance – Tested to both BS 476 20-22 and BS EN 1366-4 -
Nullifire FJ240 Spanatherm
£58.74Fire resistant rock fibre expansion joints for slab edging and curtain walling, preventing the spread of smoke and fire.
Up to 2 hours fire integrity
Vapour and smoke barrier
Allows significant movement accommodation
1200 x 600 x 100mm slabsPlease contact our technical team on 01132455450 for custom size requirements
-
Nullifire FJ260 Cavity Barrier
£77.81FJ260 Cavity Barrier is a close state cavity barrier made of rock mineral wool and designed to maintain the required fire resistance when following fire compartment lines.
-
Nullifire FJ400 Intuspan
£16.20A very pliable intumescent expansion joint with a high level of movement that is suitable for gaps up to 100 mm, providing up to 2 hours fire performance with no adhesive required in most situations.
Ideal for high vibration areas, such as lift shaft interfaces
Can accommodate regular cycles of high or low amplitude movement
Tolerates very large movements
Unaffected by moisture
Easy to install using finger pressure even in uneven gaps
Suits vertical & horizontal joints, and head of walls
Full dry systemPlease note: Selected items are Made To Order subject to a MOQ and an extended lead time – please see below
-
Nullifire FO230/FO323 Slotted Steel Angles & Straps
£26.12For securing fire barriers above partition walls in fire stopping applications.
Made from DX51D+Z275 NAC galvanised steel
20 x 6mm slotted holes @ 300mm Ctrs in centre on both sides of angle and centre of strap.
Meets relevant British Standards – see description below for more detailsPlease note – Selected items are Made To Order subject to an MOQ and an extended lead time see ‘Order References’ below
-
Nullifire FP170 Intucollar Intumescent Pipe Collars
£11.33Expands when exposed to fire, reinstating the fire performance of compartment walls and floors which have been penetrated by combustible pipes.
Up to 4 hours fire resistance – Tested to EN 1366-3
Tested with combustible pipes (PVC, PE, PP, SanPVC, Bevex, etc.), insulated non- combustible pipes (steel) and network cable bundles (up to 125 mm)
Flexible walls (stud partitions) or rigid walls (masonry, concrete) of 100 mm minimum thickness. Rigid (concrete) floors of 150 mm minimum thickness
Easy to install, stainless steel shell
Water resistant and non-corrosive: inert product
This new, improved version of FP170 is available in multiple sizes; other sizes are available to order by special request – contact our sales team on 0113 2455450 (option 2) or send a message to technical@rawlinspaints.com for more information. -
Nullifire FP220 Service Sleeve
£30.55A pipe closer device, comprising of an intumescent material within a stainless steel shell.
Expands when exposed to fire, reinstating the fire performance of compartment walls which have been penetrated by combustable pipes
Suitable for retrofit or inclusion prior to service installation, PE, HDPE, ABS, San+PVC, PP, PVC-C, UPONOR, DB, MLCP pipes
Up to 120 minutes fire protectionFP220 is required to be installed within a suitably tested substrate or included within other Nullifire tested system solutions.
Please note: Selected items are Made To Order subject to a MOQ and an extended lead time – please see below -
Nullifire FP302 Intustrap/Band
£251.02A rubber based product with graphite impregnation that creates an extremely flexible pipe closure device. The product remains dormant, until exposed to fire conditions, at which point it will expand to fill the space left by the melting combustible element. FP302 has a release tape to one side. This permits the thermal expansion of services, if required, and eases its application, allowing the product to slide freely along the pipe to its end location.
Up to 4 hours fire resistance – Tested to BS EN 1366-3 and BS 476 Pt 20-22
Suitable for use in many substrate types
Remains permanently flexible
Unaffected by moisture
Easy to inspect
CE marked
Simply link with duct tape -
Nullifire FP333 Trunking Infill
Price range: £4.34 through £10.22FP333 Trunking Infill is a fire resistant compressible foam strip layered with high expansion intumescent material produced in three sizes. In a fire, the intumescent expands and hardens providing a fire and cold smoke barrier.
-
Nullifire FR230 Intucompound Fire Mortar
£30.94Gypsum based mortar used to reinstate the fire resistance performance of floor & wall constructions where they have been breached with apertures for the penetration of single or multiple services.
Up to 4 hours fire resistance – Tested to EN 1366-3 & 4
Provides a safe working platform for loads up to 2.5 kN/m²
1.21 m² without framework requirement
Load and impact capability after 50 hours only
Flows easily around and behind services
Rapid setting, zero shrinkage formulation
Can be used as pourable or trowel grade
Acoustic and thermal performance
Features Optifire+, a unique pigment technology, visible only with a specific Nullifire detector ; Optifire+ offers lifetime identification, and remains traceable even after a fire. -
Nullifire FS702 Intumastic Fire Resistant Acrylic Sealant
£42.26FS702 Intumastic is a water-based acrylic sealant which cures to give a firm but flexible fire seal, for both linear joints & service penetrations.
-
Nullifire FS703 Fire Resistant Silicone Sealant
£126.98FS703 is a low modulus, neutral cure, silicone sealant, suitable for linear gaps sealing in order to reinstate the fire performance in compartment walls & floors.
-
Nullifire FS709 Intumastic HP Intumescent Sealant
£232.39A heat-reactive, intumescent acrylic fire barrier mastic for internal use around services in walls and floors.
Seals around pipes, cables and cable trays.
Provides up to 4 hours of fire resistance.
60 to 120 min tack time (depending on temperature/humidity). -
Nullifire FS712 Intucoat Brush Grade
£50.70Water-based acrylic coating and adhesive, which may be used in conjunction with FB750 Intubatt, FB770 Intudeck and FJ220 Intubatt 3 as a bonding agent and a surface repair coating.
Up to 4 hours fire resistance – Tested to EN 1366-4, EN 1366-3 and BS 476 Pt 20-22 in conjunction with FB750 Intubatt, FB770 Intudeck and FJ220 Intubatt 3
Used for sealing FB750 Intubatt/FB770 Intudeck/FJ220 Intubatt 3 on flexible walls, rigid walls & floors (usage dependent on product selected)
Acoustics up to 59 dB – Air seal up to 2,000 Pa
Provides a tested smoke seal
Optifire unique traceability identifiers -
Nullifire PM020 Alkyd High-Build Primer
£74.39Fast-drying steel primer that provides corrosion protection on structural steel. Well suited for fabrication shops that need fast cure to dry and handle times.
Rapid cure and fast-drying
VOC compliant for most areas
Good for filling properties on rough and pitted steelNullifire have made the decision in March 2023 to rebrand Nullifire PM020 High Build Alkyd Primer as Carboline Carbocoat 115 – please see a letter explaining the changes HERE.
