-
Nullifire FI025 Intuflex Wrap
£89.58Insulated pipe and cable wrap for preventing heat exchange in pipes and cable trays through fire barriers, walls and floors.
For steel pipes, cable trays, cable ladders, cable baskets, steel trunking and movement sleeves.
Can be cut for better accommodation, if required. -
Nullifire FP170 Intucollar Intumescent Pipe Collars
£11.33Expands when exposed to fire, reinstating the fire performance of compartment walls and floors which have been penetrated by combustible pipes.
Up to 4 hours fire resistance – Tested to EN 1366-3
Tested with combustible pipes (PVC, PE, PP, SanPVC, Bevex, etc.), insulated non- combustible pipes (steel) and network cable bundles (up to 125 mm)
Flexible walls (stud partitions) or rigid walls (masonry, concrete) of 100 mm minimum thickness. Rigid (concrete) floors of 150 mm minimum thickness
Easy to install, stainless steel shell
Water resistant and non-corrosive: inert product
This new, improved version of FP170 is available in multiple sizes; other sizes are available to order by special request – contact our sales team on 0113 2455450 (option 2) or send a message to technical@rawlinspaints.com for more information. -
Nullifire FP220 Service Sleeve
£30.55A pipe closer device, comprising of an intumescent material within a stainless steel shell.
Expands when exposed to fire, reinstating the fire performance of compartment walls which have been penetrated by combustable pipes
Suitable for retrofit or inclusion prior to service installation, PE, HDPE, ABS, San+PVC, PP, PVC-C, UPONOR, DB, MLCP pipes
Up to 120 minutes fire protectionFP220 is required to be installed within a suitably tested substrate or included within other Nullifire tested system solutions.
Please note: Selected items are Made To Order subject to a MOQ and an extended lead time – please see below -
Nullifire FP302 Intustrap/Band
£251.02A rubber based product with graphite impregnation that creates an extremely flexible pipe closure device. The product remains dormant, until exposed to fire conditions, at which point it will expand to fill the space left by the melting combustible element. FP302 has a release tape to one side. This permits the thermal expansion of services, if required, and eases its application, allowing the product to slide freely along the pipe to its end location.
Up to 4 hours fire resistance – Tested to BS EN 1366-3 and BS 476 Pt 20-22
Suitable for use in many substrate types
Remains permanently flexible
Unaffected by moisture
Easy to inspect
CE marked
Simply link with duct tape
