SAXON ANTI-GRAFFITI COATING
April 25, 2025
SAXON HORSE STABLE PAINT
April 26, 2025
SAXON ANTI-INTRUDER PAINT
SAXON ANTI-INTRUDER PAINT is a high-quality non-drying pigmented anti-climb / anti-vandal paint designed to deter intruders. A thickly applied petroleum-based coating that does not dry and provides a constantly slippery surface. It is also difficult to remove from clothing. Used to discourage intruders climbing onto roofs, up drainpipes, lampposts or climbing over walls and fences etc.
| size | 5L, 20L |
|---|
Related products
-
Nullifire SC601 On Site & Off-Site Intumescent Base Coat
£334.02Single pack acrylic thin film intumescent basecoat for fire protection of internal & semi-exposed structural steelwork up to 60 minutes.
This product is optimised to provide 60 minutes fire resistance to ‘I’ section beams and columns, hollow columns and beams, as well as cellular beams, concrete filled hollows and solid steel rods. Limited 90 minute protection is also available. SC601 can be used on steel, cast iron and galvanised steel.Intumescent paint for steel
Easy to apply, designed for on-site or off-site application by airless spray
Fast drying (compared to water based products in cold or humid conditions) for a quick turn around & shorter sites times for contractors – touch dry in 30 mins, recoat after 4 hours (at 20°C)
Competitive loadings – compatible with various primers & topcoats
Optifire+ unique traceability identifier -
Carbomastic 15 LT (Nullifire PM015)
£94.732-component, high build coating with excellent adhesion to rusted steel and most aged coatings.
Replaces Nullifire PM015 Aluminium Epoxy Primer
Surface tolerant
Recommended for painting over rusted steel where hand cleaning only is possible
Carbomastic 15 LT penetrates through rust to steel substrate and stops further corrosion and undercutting
Fast curing at low temperatures
High solids give good coverage and reduced solvent emission
Excellent maintenance primer for piping, bridges, tank exteriors, ships and offshore structures, etc
Also available in 20L – price on application – contact our sales team for more information on 0113 2455450 or send a message to sales@rawlinspaints.com.Nullifire have made the decision in March 2023 to rebrand Nullifire PM015 Aluminium Epoxy Primer as Carboline Carbomastic 15 LT – please see a letter explaining the changes HERE.
-
Nullifire TS134 – Acrylic Polyurethane Topcoat (High Gloss)
£106.74A two-component, high-gloss, and high-solid polyurethane topcoat in 350+ colours, which can be easily sprayed with conventional as well as airless equipment. The coating has excellent flow and application properties which provides a smooth, durable, and easy to clean surface.
Please note: Colours are Made To Order subject to a MOQ of 80 units and an extended lead time of 10 working daysReplaces Nullifire TS134 Acrylic Polyurethane Top Seal
Excellent weatherability
Excellent flexibility
Excellent abrasion resistance
Easy application with airless and conventional equipment
Suitable for plural component and electrostatic spray
VOC compliant to current AIM regulationsPlease note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Professional use only – from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit – https://www.safeusediisocyanates.eu/
Coverage Calculator More Information Delivery Info
