-
Carbomastic 15 LT (Nullifire PM015)
£94.732-component, high build coating with excellent adhesion to rusted steel and most aged coatings.
Replaces Nullifire PM015 Aluminium Epoxy Primer
Surface tolerant
Recommended for painting over rusted steel where hand cleaning only is possible
Carbomastic 15 LT penetrates through rust to steel substrate and stops further corrosion and undercutting
Fast curing at low temperatures
High solids give good coverage and reduced solvent emission
Excellent maintenance primer for piping, bridges, tank exteriors, ships and offshore structures, etc
Also available in 20L – price on application – contact our sales team for more information on 0113 2455450 or send a message to sales@rawlinspaints.com.Nullifire have made the decision in March 2023 to rebrand Nullifire PM015 Aluminium Epoxy Primer as Carboline Carbomastic 15 LT – please see a letter explaining the changes HERE.
-
Nullifire PM020 Alkyd High-Build Primer
£74.39Fast-drying steel primer that provides corrosion protection on structural steel. Well suited for fabrication shops that need fast cure to dry and handle times.
Rapid cure and fast-drying
VOC compliant for most areas
Good for filling properties on rough and pitted steelNullifire have made the decision in March 2023 to rebrand Nullifire PM020 High Build Alkyd Primer as Carboline Carbocoat 115 – please see a letter explaining the changes HERE.
-
Nullifire SC601 On Site & Off-Site Intumescent Base Coat
£334.02Single pack acrylic thin film intumescent basecoat for fire protection of internal & semi-exposed structural steelwork up to 60 minutes.
This product is optimised to provide 60 minutes fire resistance to ‘I’ section beams and columns, hollow columns and beams, as well as cellular beams, concrete filled hollows and solid steel rods. Limited 90 minute protection is also available. SC601 can be used on steel, cast iron and galvanised steel.Intumescent paint for steel
Easy to apply, designed for on-site or off-site application by airless spray
Fast drying (compared to water based products in cold or humid conditions) for a quick turn around & shorter sites times for contractors – touch dry in 30 mins, recoat after 4 hours (at 20°C)
Competitive loadings – compatible with various primers & topcoats
Optifire+ unique traceability identifier -
Nullifire SC801 On-Site Water-Based Intumescent Basecoat
£235.13Nullifire SC801 On-Site Water-Based Intumescent Basecoat is a water-based, white, thin film intumescent coating for the protection of internal structural steelwork, providing up to 120 minutes fire resistance.
Please Note: We strongly recommend Tricomb Plastic Wet Film Gauges are used to help ensure correct film thicknesses are achieved during application
More Information Delivery Info -
Nullifire SC804 On-Site Water-Based Intumescent Basecoat
£233.22A water based intumescent coating used for internal structural steel to C1 and C2 environments that can be top coated with a suitable topcoat for decorative and durability purposes.
Includes Optifire+ technology – reliable and traceable fire protection
Developed to give optimised loadings for up to 90 minutes
Up to 120 minutes fire resistance
Ultra Low VOC
Compatible with a wide range of primers and topcoats
Excellent aesthetics
Supplied ready to use
Loading Tables available to download -
Nullifire SC900 On-Site Intumescent Steel Coating Repair Kit
£128.51Enables seamless repairs to accidental damage in isolated areas in order to preserve fire integrity, such as long-term repairs to accidental damage caused to an SC901 or SC902 coating.
Up to 120 minutes fire resistance
Can be applied to a smooth matt finish
A compatible top seal can be applied if a decorative finish is required
Maintains the integrity of the original coating even after the repair
Same fast cure properties as the original material
Repairs can be done at low temperatures and are weather resistant
Suitable for treating scratches, grazes, indentations and minor abrasions
Low VOC and no solvent entrapment or prolonged solvent odourPlease Note: This Product Is Made to Order Subject to a 23 Working Day Lead time and a MOQ of 20
More Information Delivery Info -
Nullifire TS134 – Acrylic Polyurethane Topcoat (High Gloss)
£106.74A two-component, high-gloss, and high-solid polyurethane topcoat in 350+ colours, which can be easily sprayed with conventional as well as airless equipment. The coating has excellent flow and application properties which provides a smooth, durable, and easy to clean surface.
Please note: Colours are Made To Order subject to a MOQ of 80 units and an extended lead time of 10 working daysReplaces Nullifire TS134 Acrylic Polyurethane Top Seal
Excellent weatherability
Excellent flexibility
Excellent abrasion resistance
Easy application with airless and conventional equipment
Suitable for plural component and electrostatic spray
VOC compliant to current AIM regulationsPlease note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Professional use only – from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit – https://www.safeusediisocyanates.eu/
Coverage Calculator More Information Delivery Info -
Nullifire TS815 Solvent-Based Acrylic Topcoat
£113.30Nullifire TS815 Solvent-Based Acrylic Top Seal is a single pack, high build modified acrylic topseal conforming to 2010 VOC limits. This product is designed for use with the Nullifire System S range of intumescent basecoats.
Available in 4,300+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours
-
Nullifire TS816 Water-Based Acrylic Topcoat
£118.91TS816 is a waterborne, acrylic eggshell decorative topcoat. It is primarily for use with Nullifire intumescent steel coatings.
